STEAM BOILER TREATMENT - POWDERS

 
 

EC-105 - C.F.I.A Registered        

Oxygen Scavenger, Reducing Agent and Passivating Agent. EC-105 can prevent the formation and precipitation of ferric compounds by reducing the ferric ion to the ferrous state, thus inhibiting corrosion. EC-105 is very effective when used in conjunction with sodium sulfite as oxygen scavengers in boiler water treatment. 


 

EC-110           

Reducing Agent and Corrosion Inhibitor. EC-110 is a very effective oxygen scavenger, reducing agent and passivating agent. 

 
 

EC-112 - C.F.I.A Registered           

Sulphite Additive for Boiler Water. EC-112 is an oxygen scavenger blend, specifically designed to inactivate corrosive elements in steam boilers. Oxygen scavengers supplied by EC-112 removes free oxygen, converting it to a non corrosive, inert compound. Continuous treatment with EC-112 will effectively inhibit corrosion pitting, thus extend equipment life and reduce "downtime".

 

EC-112C - C.F.I.A Registered       

Catalyzed, Sulphite Additive for Boiler Water. Oxygen scavengers supplied by EC-112C remove free oxygen, converting it to a non corrosive, inert compound ... eliminating the principal cause of "pitting" in steam boilers and accessories.
 

 

EC-146 - C.F.I.A Registered           

Boiler Water, Alkalinity Additive. EC-146 is a strong alkaline compound and should be fed continuously by means of an automatic feed system to ensure proper alkalinity levels are maintained.  Proper alkalinity is an important factor in controlling the scale formation and corrosion characteristics inherent in raw boiler water.

 
 

EC-150 - C.F.I.A Registered           

Additive for Precipitating Dissolved Minerals. EC-150 is recommended for the removal of dissolved calcium and magnesium minerals, usually referred to as "hardness", from boiler feed water. When water hardness fluctuates, it is necessary to use an additive which will compensate for the changes. Adding EC-150 as a special phosphate treatment allows for adjustment of fluctuating water conditions.
 

 

EC-155           

Additive for Precipitating Dissolved Minerals. EC-155 is recommended for the removal of dissolved calcium and magnesium minerals, usually referred to as "hardness", from boiler feed water. Partial removal of the hardness is accomplished by precipitating the calcium which is present in the raw make up water, into a calcium phosphate sludge. The magnesium is converted into an insoluble magnesium hydroxide sludge in a specific alkaline range, thus completing the removal of hardness from water.
 

 

EC-185 - C.F.I.A Registered           

Complete, Dry Treatment for Boilers, No Phosphate. Formulated to provide effective, one step boiler protection, EC-185 is a balanced compound containing the various agents necessary for complete boiler water treatment. Continuous treatment with EC-185 will prevent hard scale formation, inactivate corrosive oxygen, and inhibit corrosion, thus extending equipment life and reducing costly "down time".

 
 

EC-195 - C.F.I.A Registered           

Complete, Dry Treatment for Boilers. Formulated to provide effective, one step boiler protection, EC-195 is a balanced compound containing the various agents necessary for complete boiler water treatment. EC-195, has an active dispersant, which conditions precipitated, scale forming minerals in boiler water . . . preventing hard scale formations. The conditioned minerals are transformed into a non adhering, soft sludge easily expelled by boiler blowdown.
 
Home